Advantages and disadvantages of biomedical wastes

Recycling sites are always unhygienic, unsafe and unsightly Go to any waste recycling site, and you will almost always stumble upon unhygienic, unhealthy and unsightly conditions.

Bio-medical model of health

Calculations show that letting organic matter break down in landfills will contribute about 30 percent more to global warming than burning the equivalent matter in an incinerator—which is far from zero emissions, but still a step in the right direction [7].

Recycling cuts down amount of waste in landfill sites Recycling Advantages and disadvantages of biomedical wastes and used materials into reusable products enormously reduces the possibility of choking of landfill sites.

Locations where every manner of waste is piled provides a nice ground for the formation of debris and spread of infectious diseases. In the long run, they may save cities, counties or societies money by reducing the need for landfills and by helping reduce the environmental impact of garbage disposal.

Recycling is a surefire way of conserving existing raw materials and protecting them for future use. The whole process of processing and manufacturing products from waste materials emits few greenhouse gases because the very waste recycling industries burn little fossil fuels.

This is beneficial because it helps minimize land and water pollution since landfills contribute mightily to environmental degradation.

This makes products of recycled waste less durable and low priced. Also, if such waste products come into contact with water, results in the formation of leachate that ends up polluting water bodiesnot to mention drinking water. It is this contaminated mixture that can penetrate underground aquifers and pollute them with unsafe quantities of salts, heavy metals and volatile organic compounds, plus other toxic or corrosive chemicals or substances found in household trash.

In small countries, or in municipalities where landfills are full and additional space is scarce, this type of mass and volume reduction can be a godsend. Recycling is mostly common in schools and homes and has not hit a bigger milestone, for example, it has not been wholly used at local industries or holistically at a global stage.

As an alternative to landfills, incineration offers the following advantages: The recyclable waste materials can be bought and sold the same way raw material would be. On top of causing massive pollutionthe whole recycling process poses health risks for dedicated individuals responsible for recycling these waste products.

Recycling of these industrial wastes such as plastics, cans, and chemicals go a long way towards considerably cutting back on levels of pollution because these waste products are reused rather than just being thrown away recklessly.

Building up a new waste recycling unit takes up a lot of capital. Governments these days have stepped in to encourage recycling from lower levels, for instance, schools, small-sized organizations and also at global levels. Recycling minimizes global warming It is perfectly true that recycling minimizes global warming and its grave impacts.

But that is small consolation for local or state governments with tight budgets, or for the taxpayers who that are expected to foot the bill for new incinerators facilities. Many products in the modern day are manufactured using recycled waste materials.

Waste Incineration: Advantages and Disadvantages

It would change our collective mindset from reactionary to proactive, altering the fundamental practices and assumptions of our throw-away society—which incineration does not do. The accompanying costs include buying different kinds of utility vehicles, upgrading the recycling unit, waste, and chemical disposal and schooling the locals by initiating useful programs and seminars.

If we exploited every available opportunity to recycle the plasticmetal, glass, rubber and other non-organic waste that gets discarded, and if we composted as much of our excess organic matter as we conceivably could, zero waste supporters say we could cut our garbage production by as much as 80 percent [8].

During waste disposal, huge amounts of waste are combusted that lead to emission of vast greenhouse gases such as carbon dioxide, sulfur, and nitrogen, which contribute to climate change and global warming.

High-temperature, mass-scale incineration produces ash, flue gases, and heat, and at the end of the burning cycle the total mass of solid waste left behind will be dramatically reduced. The quality of products manufactured from recycled waste may not be on par regarding quality.

Additional advantage is that waste incineration plants can be located near where waste is generated, which decreases the costs, energy and emissions associated with transporting waste.

Slightly more than half of the remainder is recycled in the United States the percentage is Conservation of trees at school is incomparable to the massive destruction of trees and oil spills happening at industrial levels. The recycling process alleviates the possibility of discriminate use of raw materials when they are obtainable in huge supply.

However, scrubbing technology eliminates most of the contamination in flue gases before it is released, and only trace amounts of dioxin will exit smokestacks most is removed or accumulates on the inside of the smokestack, where it can be removed later. Why Is Recycling Important?

Manufacturing Manufacturing is where the processed waste materials are converted into useful products. Recycling and waste reduction must be considered as our first line of defense to reduce our overall waste stream, and this also must include composting our organic waste instead of throwing it away.

Before taking the bold step of recycling, it is crucial to understand the good and bad involved in this process. Municipal solid waste incineration process In the 21st century, incineration methodology has advanced far beyond its crude origins.

Is incineration better than landfills? Recycling has a plethora of advantages to humans and environments.The biomedical model is widely accepted and forms the basis of health care throughout the western world. Advantages and disadvantages of the biomedical model of.

Advantages And Disadvantages Of Biomedical Wastes animals were slaughtered for consumptions on diverse places in the country.

Advantages and Disadvantages of Recycling

Hence, cleanliness of the public slaughterhouse must be monitored for the safety of the meat products before the public consumption (Hudsen, ). The disadvantages of solid waste incineration include: #1 High expense Incineration facilities accrue significant costs for site studies, permits, construction materials, labor, and local infrastructure modification (providing water, power, road access, etc.).

Over all, the biomedical model has a lot more disadvantages than advantages, however I feel like because Sociology is such an opinion based subject, you can't really say whether something is correct or incorrect.

It is an important technique used around the world, including explosive materials such as health waste incineration, biodegradable waste, polyvinyl chloride plastics, papers and scrapped pieces of. Contain the advantages and disadvantages of: 1.

Physico-chemical treatment -Air- stripping -Soil-vapour extraction -Carbon adsorption -Steam-stripping 5/5(1).

Download
Advantages and disadvantages of biomedical wastes
Rated 0/5 based on 3 review